Drone SDK Development

Custom drone applications and payload integration with DJI SDKs

Revot Co., Ltd. (株式会社revot) · University of Tsukuba spin-off · Shinjuku, Tokyo

Revot develops custom drone applications, automated flight functions, and sensor integrations using DJI SDKs. Revot also conducts research and development on GNSS-free autonomous flight for environments where GPS is unavailable. Revot Co., Ltd. is a University of Tsukuba spin-off in Tokyo. Its development scope covers aircraft operation, measurement equipment, LiDAR point cloud processing, and connections to business systems.

Inquiries in English are accepted by email at contact@revot.jp. The contact form on this site is in Japanese. Revot replies in English or Japanese.

Development around your drone operations

A commercially available drone and its standard application may not cover the requirements of an inspection, survey, or measurement task. Revot uses software development kits, or SDKs, to develop functions around the data, flight procedures, and operator controls that the work requires.

Revot can develop the following functions through SDK development:

  • Register inspection routes and start an automated patrol with a single button, capturing images at specified positions and angles.
  • Automatically associate images with property IDs, dates, times, and coordinates, then upload them to the cloud.
  • Collect data from custom sensors mounted on the aircraft.
  • Provide a dedicated interface with a limited set of functions to help prevent operator errors.
  • Connect collected data directly to internal business systems.

Selecting the DJI SDK and aircraft

Revot starts with the intended operation when selecting an aircraft and SDK. The choice changes what can be achieved and how difficult the development is. Supported aircraft differ by SDK, including models in the M300 RTK, M350, and Mavic ranges. Revot reviews this combination at the beginning because an unsuitable choice can require redevelopment.

SDKFunctionsApplications
Mobile SDKControl the aircraft from a custom smartphone or tablet application. Automate flight, control the camera, acquire and stream video, and record flight logs.Automated patrols, dedicated operator interfaces, automated photography, and connections to internal systems.
Payload SDKMount custom sensors or equipment and use power, communication, and control supplied by the aircraft.Specialized sensors, custom measurement tasks, and dedicated equipment development.
Onboard SDK / onboard processingProcess data during flight using a small computer mounted on the aircraft.Autonomous decisions where communication is unavailable and real-time analysis.

Revot's development scope

  • Custom applications: Revot develops iOS/Android applications using Mobile SDK. Functions include setting and executing automated flight routes, controlling cameras and gimbals, and automatically organizing and uploading captured data.
  • Custom payloads: Revot integrates measurement equipment other than cameras using Payload SDK. Revot also designs and manufactures sensor equipment in-house, covering both the instrument and its integration with the aircraft.
  • GNSS-free autonomous flight: Revot researches and develops position estimation and autonomous flight for indoor spaces, underground areas, tunnels, and locations beneath bridges. The core technologies are LiDAR-based SLAM and sensor fusion with an IMU. Commissioned development can begin with a proof of concept, or PoC, under the conditions of the intended site.
  • Point clouds and 3D reconstruction: Revot processes LiDAR point clouds into 3D models and compares measurements with previous surveys. These comparisons support assessment of equipment deterioration, deformation, and material accumulation.
  • Business system integration: Revot develops connections between DJI Dock, DJI Cloud API, FlightHub 2, internal systems, and business applications.

Revot has assembled research aircraft and developed an agricultural aircraft together with a system that predicts crop yields from captured images. Revot's scope therefore includes modifications to the aircraft itself as well as applications for commercially available drones.

Applications in inspection, surveying, and agriculture

Revot develops drone functions around the information a task needs to produce. For repeated inspections, this can mean capturing images from consistent positions. For measurement work, it can mean converting point clouds into volumes or comparing changes over time.

ApplicationDevelopment scope
Equipment and infrastructure inspectionAutomate image capture at the same positions and angles for comparison with previous inspections.
Indoor and underground surveysDevelop autonomous flight and 3D data acquisition in spaces where GPS is unavailable.
Surveying and earthwork volume calculationCalculate volumes from point clouds and track monthly changes.
Disaster assessment and hazardous locationsCollect data from locations that people cannot enter.
AgricultureAutomate spraying routes and observe crop growth from fixed observation points.

Information for the initial discussion

The initial discussion moves faster if you can share the following 5 points. Requirements do not need to be complete before the initial discussion. Revot helps clarify the parts that remain undecided.

  • Required information: Whether images are sufficient or the task requires dimensions, volumes, or other measurements.
  • Flight environment: Whether the site is outdoors or indoors, whether GPS is available, and the size of the area.
  • Operators: Whether specialists or site personnel will operate the system. This affects the design of the interface.
  • Frequency: Whether the work is a single survey or repeated observation, such as monthly measurement.
  • Data use: Whether operators will view the results locally or transfer them into an internal system.

Revot also checks regulatory requirements at the start. Permission or approval under Japan's Civil Aeronautics Act may be needed depending on aircraft weight, flight location, and flight method. Revot checks whether these requirements apply before developing the plan.

Indicative development costs and durations

Revot uses the following figures as planning estimates. Custom sensor development, GNSS-free autonomous flight, data processing, and business system integration can increase the project cost. All prices below exclude consumption tax.

ScopeIndicative costDuration
Operational verification / PoCFrom JPY 980,0001–2 months
Custom control application with Mobile SDKFrom JPY 980,0003–6 months
Payload SDK / custom equipment integrationFrom JPY 5 million4–10 months
Development including data processing and business system integrationFrom JPY 8 million6–12 months

Deliverables and project inquiries

Revot's deliverables include physical hardware, design data for circuits, boards, and 3D designs, bills of materials, source code, parameter lists, and test reports. Revot can also discuss the transfer of rights.

Revot accepts inquiries from the stage of identifying the data to collect at a site. Revot can help select the aircraft and SDK and check the applicable laws and regulations. An inquiry can describe the aircraft you intend to use, the operations you need, and the data you want to obtain.

Revot accepts inquiries in English by email at contact@revot.jp. You may include documents or drawings. The contact form on the site is in Japanese. Revot replies in English or Japanese.

Frequently asked questions

Which DJI SDK should a project use?

Mobile SDK supports custom smartphone and tablet applications for aircraft operation. Payload SDK supports custom sensors and equipment. Onboard SDK and onboard processing support computation during flight. We select the aircraft and SDK according to the intended operation because supported models differ.

Can Revot develop flight functions for indoor spaces without GPS?

Yes. We research and develop GNSS-free autonomous flight using LiDAR-based SLAM and sensor fusion with an IMU to estimate position. Commissioned development can start with a PoC based on site conditions, including indoor spaces, underground areas, tunnels, and locations beneath bridges.

Can Revot integrate a custom sensor with a drone?

Yes. We use Payload SDK to integrate measurement equipment other than cameras. We can also design and manufacture the sensor equipment itself, covering the instrument and its integration with the aircraft.

Can Revot connect DJI Dock, DJI Cloud API, and FlightHub 2 to internal systems?

Yes. We develop integrations that connect DJI Dock, DJI Cloud API, and FlightHub 2 with internal systems and business applications.

What are the indicative cost and duration?

As a guide, operational verification or a PoC starts at JPY 980,000 and takes 1–2 months, and a custom control application starts at JPY 980,000 and takes 3–6 months. These prices exclude consumption tax. Custom sensors, GNSS-free flight, data processing, and business system integration can increase the cost.

Do requirements need to be complete before contacting Revot?

No. We can help clarify the requirements. Useful starting information includes the data you need, the flight environment, the operators, the frequency of operation, and how you intend to use the collected data.

Contact Revot

Inquiries in English are accepted by email at contact@revot.jp; the contact form is in Japanese. Seita Sukisaki, the representative director, replies directly within one to two business days.

Email contact@revot.jp

Revot Co., Ltd. / 3-16 Ichigaya-Tamachi, Shinjuku-ku, Tokyo 162-0843, Japan

Contact form (Japanese)