PCB design and electronic device development
Revot Co., Ltd. is a University of Tsukuba spin-off in Tokyo. Revot develops electronic devices from individual prototypes through small-batch manufacturing and production design. Services cover circuit design, printed circuit boards, enclosures, firmware, Japanese radio certification support, and OEM/ODM development. Revot has manufactured Cyber KASSEN wearable devices in quantities for several hundred people to wear simultaneously at events.
Inquiries in English are accepted by email at contact@revot.jp. The contact form on this site is in Japanese. Revot replies in English or Japanese.
From a circuit board to a working prototype
PCB design places electronic components and routes their connections on a printed circuit board. Electronic device development combines that board with an enclosure, power supply, and firmware to create a working product. Revot accepts projects starting with a single prototype.
Revot recommends testing the most uncertain technical requirements before proceeding to full product design. In most cases, requirements change once a device is tested in the field. Development can progress through a proof of concept, a prototype for practical use, and full product design.
| Stage | Purpose | Indicative cost | Duration |
|---|---|---|---|
| Proof of concept (PoC) | Verify technical feasibility | From JPY 980,000 | 1–3 months |
| Prototype | Build a usable device for field testing | From JPY 2,000,000 | 2–5 months |
| Full product design | Develop the quality required for a product | From JPY 3,000,000 | 4–10 months |
These prices are total project amounts excluding consumption tax, without subsidies.
Circuit, PCB, enclosure, and firmware development
Revot handles the hardware and software that determine how a device operates. Revot also develops connected smartphone applications and cloud systems internally.
- Circuit design: Revot designs circuits combining sensors, microcontrollers, wireless modules, and power supplies.
- PCB and FPC design: Revot translates circuits into printed circuit boards and flexible printed circuits, considering noise, heat, component assembly, and cost together.
- Enclosure design: Revot designs the housing around the board, considering wearing comfort, water and dust resistance, and impact resistance as appropriate. Revot uses 3D-printed prototypes to check the physical form.
- Firmware: Revot develops sensor reading, decision logic, communication, display functions, and power-saving controls.
- Development boards: Revot has development experience with NVIDIA Jetson, Raspberry Pi, Orange Pi, and Khadas VIM4.
- Wireless certification: Revot assesses the applicability of Japan's radio technical conformity certification, known as Giteki, early and incorporates it into the development schedule.
- Applications and cloud systems: Revot develops connected applications and cloud systems alongside mechanical design, circuits, and firmware.
- Design for manufacturing (DFM): Revot revises prototype designs for production, considering component availability, assembly, inspection methods, yield, and cost.
A functioning prototype does not establish that the same design is ready for production. Revot addresses manufacturing requirements when developing a design that can be produced in quantity.
OEM and ODM development
Revot supports development and manufacturing for products sold under a client's own brand. The scope can include design and manufacturing together, or design alone.
- ODM: Revot accepts a product concept and handles design, prototyping, production design, and manufacturing.
- OEM: Revot handles design and manufacturing for products with defined specifications.
- Design only: Revot provides the design while the client's manufacturing partner handles production.
Revot proposes a feasible configuration based on the product, quantity, target unit cost, delivery date, and required certifications. These conditions determine the development and manufacturing approach.
Production quantities and device examples
Revot has manufactured devices used in actual events and competitions. Examples include Cyber KASSEN wearables, SASSEN LED swords with integrated sensors, and Cyber Molkky measurement devices.
| Stage or example | Quantity | Details |
|---|---|---|
| PoC and initial prototyping | 1 device | Build a prototype and verify operation; from JPY 980,000, 1–3 months |
| SASSEN development | Approximately 100 prototype swords | Repeated prototyping before completing the product |
| Small-batch manufacturing | Discuss with Revot | Indicative: from JPY 3,000,000, 3–6 months |
| Cyber KASSEN manufacturing | Several hundred devices | Manufactured in quantities for several hundred people to wear simultaneously at events |
| Production design and Giteki certification | Discuss with Revot | Indicative: from JPY 5,000,000, 6–12 months |
Revot selects components and assembly methods according to the planned quantity. Sharing expected production quantities at the prototype stage allows Revot to consider those requirements from the beginning.
Decisions before PCB design
Unresolved requirements can cause substantial variation in PCB design estimates. Settling the following points first reduces the number of prototype revisions.
- Power source: Battery, USB, or an external power supply. Component selection depends on this decision.
- Board dimensions: The available enclosure space, board shape, and connector positions.
- Wireless functions: Antenna space and location need consideration from the beginning. Adding space later can require substantial redesign.
- Production quantity: A run of 10 devices and a run of 10,000 devices require different component and assembly decisions.
- Operating environment: Outdoor use, high temperatures, vibration, and exposure to water.
- Certification requirements: Revot checks applicable requirements before design, including Giteki, PSE, or medical device requirements.
Plan for two to three prototype revisions
Prototype development typically requires two to three revisions. Physical testing reveals issues that remain uncertain during design. Noise and heat, in particular, cannot be fully assessed through simulation alone.
| Revision | Purpose | Issues identified |
|---|---|---|
| First revision | Check whether the circuit operates as intended | Wiring errors, insufficient power capacity, incorrect component orientation |
| Second revision | Test in the actual enclosure and operating environment | Noise, heat, connector interference, antenna performance |
| Third revision | Prepare the design for manufacturing | Component availability, ease of assembly, testability |
Revot recommends including revision cycles in the project plan rather than assuming that the first board will be the final design.
Component availability and continued production
Components available during design may become difficult to obtain by the time manufacturing begins. Revot considers procurement as part of production design.
- Alternative components: Revot prioritizes components with pin-compatible alternatives from multiple manufacturers.
- End-of-life plans: Revot checks discontinuation plans and selects components with published supply periods.
- Specialized components: Revot prepares alternative procurement routes to address dependence on a single manufacturer.
- Lead times: Revot incorporates procurement lead times into planning. Some components can take several months to obtain.
Discuss your device and production plans
An initial inquiry can start with what the device should measure or control, where it will operate, and how many units are needed. Revot also reviews power requirements, required battery operating time, and any target unit cost. Revot helps clarify requirements that remain undecided.
Revot provides an initial consultation and a preliminary cost estimate at no charge. Documents and drawings can be sent by email.
Revot accepts inquiries in English at contact@revot.jp and replies in English or Japanese. The contact form on the website is in Japanese.
Frequently asked questions
Can Revot handle both prototyping and small-batch manufacturing?
Yes. Revot handles circuit design, PCB design, enclosure design, and firmware development, from prototyping through small-batch manufacturing and production design, all within one company.
What quantities has Revot manufactured?
Revot has manufactured Cyber KASSEN wearables for several hundred people to use simultaneously. SASSEN development involved approximately 100 prototype LED swords. PoC projects can start with one device.
Can I commission only a proof of concept or prototype?
Yes. A PoC starts at JPY 980,000 and takes 1–3 months. A prototype starts at JPY 2,000,000 and takes 2–5 months. These amounts exclude consumption tax.
Can Revot take a project through to production?
Yes. In design for manufacturing (DFM), Revot redesigns a prototype so that it can be built reliably in quantity, taking into account component availability, ease of assembly, inspection methods, yield, and cost. Revot has manufactured Cyber KASSEN wearable devices in quantities for several hundred people to wear simultaneously at events.
Does Revot offer OEM, ODM, and design-only services?
Yes. Revot can develop and manufacture a product from a concept (ODM), design and manufacture a product from defined specifications (OEM), or provide the design only while your existing manufacturing partner handles production.
Can Revot support Giteki certification?
Yes. Revot assesses applicability during the initial consultation and incorporates the time and cost required for certification into development planning.
Can Revot work with a target unit cost?
Yes. Revot selects a component configuration based on the target unit cost. Share the expected quantity as well, because it affects component choices and manufacturing methods.
Contact Revot
Inquiries in English are accepted by email at contact@revot.jp; the contact form is in Japanese. Seita Sukisaki, the representative director, replies directly within one to two business days.
Revot Co., Ltd. / 3-16 Ichigaya-Tamachi, Shinjuku-ku, Tokyo 162-0843, Japan
Pages in Japanese: This page in Japanese / Company profile / Works and case studies